Firmware Version 1.1.1 incorporates the following enhancements and fixes:
Adds the ability to use Smart phone link adapter AD-P1.
Adds the ability, when using EOS Utility or Browser Remote for remote shooting with two cards inserted, to set the recording method and select the card to be recorded to.
Adds the ability to cancel [Subject Tracking] by pressing the Quick Control and then buttons.
Adds Ukrainian as an option to the language of “Browser Remote”.
Improves operation stability during FTP transfer.
Fixes an issue that in rare instances, the camera may become inoperable when shooting in the Servo AF setting while operating the button.
Fixes an issue, in which the camera cannot be used as an access point if the camera is being used in a region that only support 2.4 GHz bandwidth for Wi-Fi connections.
Adds the ability to set “Custom high speed continuous” to the Drive mode. It is possible to shoot from 2 to 50 images continuously at a speed of approximately 30 to 195 fps.
Adds the ability to select “FHD 239.76 fps/200.00 fps” in “High frame rate.”
1- Adds the ability for in camera “Depth compositing” during “Focus bracketing.”
2- Adds Focus bracketing and depth compositing with a flash (Speedlite EL-1).
Adds the ability of time-lapse movie recording. Note that the time-lapse movie setting is retained even if the camera enters the Auto Power Off state before starting time-lapse movie recording.
Adds the ability of Cloud RAW processing functionality. RAW processing with the latest image processing technology is possible. This is a paid service that requires the purchase of a Canon Imaging App Service Plan, which will be available starting July 25, 2022.
Adds the ability to convert multiple HEIF images into multiple JPEG images…
Adds the ability to set [Still Image Crop/Aspect] to [Custom Controls]. The assigned button can be used to switch between crop and aspect ratio.
Adds the ability to crop and resize images during transfer to an FTP server.
802.1X authentication/WPA2-Enterprise now supports the PKCS#12 certificate format.
Adds an electronic shutter sound to be played when the mechanical shutter or electronic 1st-curtain is set.
Enhances the performance of “Movie Digital IS”. It stabilizes the image when taking selfies or walking shots using a wide-angle lens.
Adds [Auto Power Off Temp.: Standard/High] to the menu for still shooting.
Fixes an issue, which displays Error Code 70 on the camera, that may occur, in rare instances, when the [Disp. performance] setting is set to [Smooth].
Canon retirou o download do firmware 1.2.0 sem dar motivos do por que.
“The latest firmware version 1.2.0 for the EOS R3 is temporarily unavailable. We anticipate the firmware being available in the near future; therefore please check back soon for your download.”
User DrJohnEvs in the DPReview forum writes (emphasis mine):
I installed v1.2 a few days ago and all worked well.
I noticed last night that it had been withdrawn from Canon UK site.
This morning I contacted CPS UK. I have just received a reply saying there is an issue and recommended I go back to v1.1.1
The issue is that if you have v1.2 on your camera and then perform a reset the mode dial does not work correctly and you cannot change between Tv Av etc.
Adds the ability to set “Custom high speed continuous” to the Drive mode. It is possible to shoot from 2 to 50 images continuously at a speed of approximately 30 to 195 fps.
Adds the ability to select “FHD 239.76 fps/200.00 fps” in “High frame rate.”
1- Adds the ability for in camera “Depth compositing” during “Focus bracketing.”
2- Adds Focus bracketing and depth compositing with a flash (Speedlite EL-1).
Adds the ability of time-lapse movie recording. Note that the time-lapse movie setting is retained even if the camera enters the Auto Power Off state before starting time-lapse movie recording.
Adds the ability of Cloud RAW processing functionality. RAW processing with the latest image processing technology is possible. This is a paid service that requires the purchase of a Canon Imaging App Service Plan, which will be available starting July 25, 2022.
Adds the ability to convert multiple HEIF images into multiple JPEG images.
Adds the ability to set [Still Image Crop/Aspect] to [Custom Controls]. The assigned button can be used to switch between crop and aspect ratio.
Adds the ability to crop and resize images during transfer to an FTP server.
802.1X authentication/WPA2-Enterprise now supports the PKCS#12 certificate format.
Adds an electronic shutter sound to be played when the mechanical shutter or electronic 1st-curtain is set.
Enhances the performance of “Movie Digital IS”. It stabilizes the image when taking selfies or walking shots using a wide-angle lens.
Adds [Auto Power Off Temp.: Standard/High] to the menu for still shooting.
Fixes an issue, which displays Error Code 70 on the camera, that may occur, in rare instances, when the [Disp. performance] setting is set to [Smooth].
Fixes minor issues.
Fixes an issue, in which, after having updated the camera to firmware Version 1.2.0, when performing the [Factory reset] operation, some shooting settings are not retained.
*Items 1 through 14 are changes of Firmware Version 1.2.0, and item 15 is newly added for Firmware Version 1.2.1.
Firmware Version 1.4.0 incorporates the following enhancements and fixes:
Adds support for Speedlite EL-5.*
*The automatic light intensity adjustment of the AF-assist beam is not supported.
Adds [Register people priority] to the camera menu.
Pre-registered people can now be detected and tracked with priority.**
** This feature may not operate if faces are too small to detect, in profile or turned at an angle or partially hidden; for scenes where the subject is
This firmware includes the following enhancements and fixes:
Compatible with Speedlite EL-5. *It is not compatible with the automatic dimming function of the AF auxiliary light.
Added [Registered people priority] to the menu. Pre-registered people can now be preferentially detected and tracked.
The effect may not be obtained for small faces, oblique faces/profiles, scenes with part of the face hidden, subjects in motion, or shooting environments.
[Save/load communication settings to card] has been added to the menu. Network settings can now be inherited between cameras of the same model.
[Panning Assist] has been added to the menu. When panning with a compatible lens, “camera shake correction” and “subject blur correction” are performed during exposure.
Shortened the time it takes for the AWB results to be reflected in the viewfinder when looking through the viewfinder with the auto white balance (AWB) setting.
“Image protection” for FTP transfer has been added to the menu. Images transferred by FTP can now be automatically protected. This makes it possible to determine whether or not the image has been FTP-transferred.
After updating to firmware version 1.4.0, the phenomenon that Err70 may occur under certain conditions in combination with some EF lenses has been corrected.
After updating to firmware version 1.4.0, when using the electronic shutter for high-speed continuous shooting, depending on the shooting conditions, the original tracking performance of Servo AF may not be obtained.
Fixed minor bugs.
1-6, 9 are the changed contents of Version 1.4.0, 7, 8 are the added contents of Version 1.4.1.
If the camera’s firmware is already version 1.4.1, there is no need to change the firmware. When changing the firmware, please read this page carefully before using the download service.
Camera Remote Application It is now possible to register the focus position in the preset function of the CR-A100. When used with the CR-S700R robotic camera system, it makes it easier for the photographer to focus on the intended subject distance and shoot.
It is now possible to erase only voice memos attached to images. In addition, it is now possible to add and add voice memos to protected images.
Enhanced security when sending captured images via FTPS transfer.
If you press the “Exposure Compensation/Aperture Value Setting Button” while looking through the viewfinder, you can check the time in the viewfinder.
Fixed a phenomenon in which the camera operation was rarely effective after touch operation, and [BUSY] was displayed even when the camera was operated.
button operation and the timing of the viewfinder on sensor.